Fender 2X Tweed Twin & Pro combo amp speaker wire harness



The 14 gauge Fender Twin & Pro combo amp speaker wire harness kit.

  • Also available with an RCA plug instead of the 1/4″ 6mm
  • This Harness will work with any 2x combo amp configuration.
  • No Soldering is required for a proper installation.
  • This is a simple plug and play harness.
  • The harness does not affect the ohm load.
  • Your speakers determine the ohm load.
  • This is a Parallel harness
  • We point to point hand wire and solder every harness with silver solder.
  • This harness comes with gold plated insulators,
  • + And ( + is the red clip and is the black clip )
  • Ready to install with quick disconnects soldered to the wire’s for you.
  • Built with 32 Inches of cable for an easy install.
  • Made with tight quality controlled manufacturing standards.
  • Terminations are of 100% consistent physical reliability.
  • Heated to 250°F (121°C) for a skin tight, flame retardant & flexible fit.
  • Water & condensation proof at vastly different temperature ranges.
  • This harness installed correctly will wire:
  • Two 8 ohm speaker to 4 ohms
  • Two 16 ohm speakers to 8 ohms
  • Or 2 4 ohm speaker to 2 ohms (2 Ohms is not recommended).
  • All connections are double reinforced with 3M heat shrink tubing
  • All speaker clips are heat shrink protected, insulated and gold plated.  
  • MIL SPEC = essential technical requirements for purchased material that is manufactured to military standards or substantially modified commercial items.

All Tone RushWiring harness’s

  • Are hand made in the USA
  • Have a no hassle, Lifetime Warranty.
  • Compliant with UL VW-1 Vertical Wire Flame Test.
  • Are RoHS Compliant (Restriction of Hazardous Substances)
  • Are MIL SPEC = Meets US Military manufacturing requirements.
  • Are NOT CCA (copper clad aluminum)
  • Are OFC (Oxygen Free Cable) CGSC pure, high strand count Copper
  • Exemplify high quality & maximum performance at affordable prices.

This Tone Rush harness is made with four layers of external insulators

  • 1. Strong, flexible Nylon braid covering, available in many colors & patterns.
  • 2. External component pairings are reinforced with 3M heat shrink tubing.
  • 3. Internal connections are reinforced with 3M heat shrink tubing.
  • 4. PTFE coated PVC outer jacket that Resists:
  • ∞ Tangling ∞ Ripping ∞ Tearing ∞ Wear ∞ Heat ∞ Cold
  • ∞ Condensation ∞ Water ∞ Abrasion ∞ Cuts ∞ U.V. light ∞ Abuse
All of our harness speaker cables internally consist of:
  • State of the art material & construction design for:
  • Maximum flexibility, durability, conductivity and hum elimination.
  • 14 Gauge, flexible, soft, bare high strand count, O.F.C. twisted-pair copper.
  • Silver soldered joints that are heat shrink protected & insulated.·
  • Our proprietary straight run cable features extended frequency response,
  • Low noise, low capacitance & low inductance for:
  • A natural, quiet performance with clean, clear sound.
  • All of our 1/4″ connectors feature heavy duty nickel over brass shells.
  • Every connector / plug has machined contacts with plated plugs.

The input jack features a full Chrome plated steel shaft. This 1/4″ (6.35 mm) jack uses heavy duty contacts that delivers top quality signal transfer performance with a ultra heavy duty chassis that excels in professional audio applications.
This harness includes

  • Full Gold plated 1/4″ / 6.35mm Input plug
  • 32″ cables with Gold plated heavily insulated quick disconnects
  • All terminations completely sealed
  • Cable clamps and screws
  • All Harness’s will ship the same day if ordered by 12pm CST
  • Satisfaction Guaranteed!
Our warranty:
  • Our cables are warrantied for life against:
  • Material defects
  • Manufacturing defects
  • Common use
  • Wear & tear
  • Reasonable abuse / touring / road use

Shipping & handling:

  • Small items ship the same business day if ordered before 12pm CST.
  • We use USPS mail which is usually a 2- 3-day ship time.
  • We do not profit from shipping and combine shipping when possible.
  • We ship all our cabs with UPS ground.
  • You will receive a tracking number well before the item ships.

Our return policy

  • You can return items within 7 days for a refund minus shipping.
  • Items must be returned to us unopened and untampered with.
  • ALL items are inspected & tested before packed for shipping.
  • Of our items have a lifetime warranty against manufacturer defects.
  • Shipping costs are non-refundable and nonnegotiable.